Interlock the Experimental End Station

From X6AWiki

Interlock the hutch

  1. Press the black button marked CS1 inside on the hutch wall. 
     The lights will go off and the red lights will go on. 
     At the same time a loud sound starts
  2. Leave the hutch and close the door
  3. Press the black button marked CSE outside, on the hutch wall and turn the key on the door
  4. Remove the key
  5. Insert the key in the 'hutch door kirk key panel'

Don't forget to turn the key in the direction as seen in the third figure. Otherwise you will not be able to open the shutter.

Go Back to Index

---