Preparation

From X6AWiki

Interlock the hutch 

  1. Press the black button marked CS1 inside on the hutch wall. 
     The lights will go off and the red lights will go on. 
     At the same time a loud sound starts
  2. Leave the hutch and close the door
  3. Press the black button marked CSE outside, 
     on the hutch wall and turn the key on the door
  4. Remove the key
  5. Insert the key in the 'hutch door kirk key panel'

Image:Arrow.gifDon't forget to turn the key in the direction as seen in the third figure. Otherwise you will not be able to open the shutter.

Hutch Inside button
Hutch Outside button
Hutch door kirk key panel


Entering the Hutch 

  1. Press the little black button on the 'hutch door kirk key panel' 
     turn the key and take it out.
  2. Insert it in the top key hole on the hutch door, 
     turn the key and open the door.
Image:Arrow.gif Press the RED emergency button inside the hutch only if it's inevitable.
For example: If anyone gets trapped inside the interlocked hutch. We hope that this scenario will never occur.
Kirk key button
Emergency Button


Retrieved from "http://protein.nsls.bnl.gov/mediawiki/index.php/Preparation"